TE701/702 MAMACSYSTEMS温度传感器系列技术资料

TE-702-B

TE-702-C温度传感器
涂漆钢外壳
坚固的钢质外壳，焊接接缝，密封盖和粉末涂层表面，符合NEMA-4/IP-65标准，适用于恶劣环境。TE-702-C具有其他所有功能，包括一个304SS探头，外部安装支架，类似于TE-702-B系列的导管开口，除了设计用于未经处理的环境中，该设备可能会受到污垢，冷凝，油蒸汽和其他污染物。
Specifications
Platinum RTD Sensors: ± 0.1% @ 0 C, Alpha: 385 per DIN 43760
Nickel RTD Sensors: (#2) ± 0.5 C @ 0 C, 5000 PPM/K T.C.R.
Nickel RTD Sensors: (#4) ± 0.5 F @ 70 F/21.1 , 6000 PPM/K T.C.R.
Balco RTD Sensors: ± 0.5 F @ 70 F/21.1 C, 4300 PPM/K T.C.R.
Thermistor Sensors: ± 0.2 C interchangeability @ 77 F/25 C
Probe Material: 1/4" / 6.3mm O.D, 0.020" / 0.5mm wall 304 Stainless Steel
Flange Material: Galvanized Steel
Bulkhead Fitting: Brass with poly compression sleeve
Plastic Enclosure: Polycarbonate 30% glass filled, rated UL 94V-5-0
Steel NEMA-1/IP-30: 18 Ga. Galvanized Steel
Steel NEMA-4/IP-65: 18 Ga. Cold Rolled Steel, Baked on Enamel
Operating Temp: -40F/-40C to 210F/100C
Ambient Temp: -40F/-40C to 160F/70C
Warranty: Five Years (Lifetime on Moisture Migration)

产品规格
铂RTD传感器： ±0.1％@ 0℃，Alpha：385根据DIN 43760
镍RTD传感器：（＃2）±0.5 C @ 0 C，5000 PPM / K TCR
镍RTD传感器：（＃4）±0.5 F @ 70 F / 21.1,6000 PPM / K TCR
Balco RTD传感器： ±0.5 F @ 70 F / 21.1 C，4300 PPM / K TCR
热敏电阻传感器：在 77°F / 25°C时±0.2°C的互换性
探头材料： 1/4“/ 6.3mm外径，0.020”/ 0.5mm壁304不锈钢
法兰材料：镀锌钢
隔板配件：黄铜与聚压缩套管
塑料外壳： 30％玻璃填充聚碳酸酯，额定值为UL 94V-5-0
钢NEMA-1 / IP-30： 18 Ga。镀锌钢
NEMA-4 / IP-65钢： 18镓冷轧钢，搪瓷烤漆
工作温度： -40F / -40C至210F / 100C
环境温度： -40F / -40C至160F / 70C

Five installation options—probe with mounting flange or bulkhead fitting, plastic, galvanized steel, or NEMA-4 / IP-65 steel enclosure offer the industry's most extensive range to satisfy all HVAC, appliance and industrial applications.
304 SS thin wall probe with a cold rolled hermetically sealed end forms a monolithic encapsulation cavity for the sensor and is immune to failures caused by high humidity, contamination, thermal shock and vibration.
The flat probe end provides a large thermally sensitive area and the sensor is in direct thermal contact to this surface. As a result, extremely fast response is achieved to changes in temperature.
Probe is attached to the enclosure or the flange using a patented process to provide a rugged, reliable and low profile attachment for ease of installation.
More than 16 types of interchangeable NTC thermistors, precision platinum, nickel or balco RTDs are available for universal compatibility.
特征管道温度传感器
五种安装选项-带安装法兰或隔板接头的探头，塑料，镀锌钢或NEMA-4/IP-65钢制外壳提供业界zui广泛的系列，以满足所有HVAC，家电和工业应用。
带有冷轧密封端头的304不锈钢薄壁探头形成传感器的整体封装腔体，不受高湿度，污染，热冲击和振动引起的故障的影响。
平坦的探头端提供了一个大的热敏感区域，传感器与该表面直接热接触。因此，对温度变化的响应速度非常快。
使用工艺将探头连接到外壳或法兰上，以提供坚固，可靠和低外形的附件，便于安装。
超过16种可互换的NTC热敏电阻，精密铂，镍或balcoRTD可用于通用兼容性。
描述
TE701/702温度传感器提供业界zui广泛的外壳，安装和传感器类型，以满足所有HVAC，工业和商业应用。这些革命性传感器集成了超过二十五年的产品开发经验，并从世界各地数以百万计的各种应用中获得的经验。该产品和工艺设计结合自动化制造工艺，以低成本生产坚固，可靠，可重复和稳定的温度传感器。*提供终身保修的温度传感器系列可防止与湿气迁移相关的故障。
对于大批量OEM客户，TE-701/702温度传感器有许多自定义配置。可根据体积定制电线类型，长度或量具，端子，连接器，探头长度，外壳选件或传感器类型。                
TE-701-A/B温度传感器法兰安装座
将一个密封的304SS探头结合到钢制法兰上，为管道温度传感提供坚固的组件。为＃8螺钉提供了两个安装孔，并且法兰配合面*密封以密封探针和螺丝孔。TE-701-A可提供3英寸/75mm引线，TE-701-B提供6英尺/1.8米充气额定电缆。TE-701-A/B是一款理想的产品，可通过墙壁温度感应应用，在空气处理机，风机盘管单元，管道，熔炉，冷冻机，烤箱或任何其他设备中实现坚固，可靠，快速和简便的安装。
TE-701-A/B                
TE-701-C/D温度传感器隔板安装座
响应速度快304SS探头带有黄铜舱壁配件和一个压缩套管，如果需要可调整的插入深度，则可形成强大的管道温度感测组件。隔板接头安装在管道中，压紧套松开，将探头插入所需的长度并拧紧套筒。传感器可提供3英寸/75毫米引线或6英尺/1.8米充气额定电缆。TE-701-C/D传感器在空气处理机，风机盘管单元，管道，充气室，熔炉，冷冻机，烤箱或任何其他需要可调节插入长度的壁式温度传感应用中提供低成本，坚固，快速和简便的安装    
TE-702-A温度传感器Polycarb外壳
无腐蚀30％玻璃填充聚碳酸酯外壳，可承受温度，机械冲击和振动。304不锈钢探针压接连接到外壳法兰，用于小型配合表面，符合不规则表面的外部安装支架，单螺丝护盖连接是提高可靠性和降低安装成本的一些功能。TE-702-A温度传感器为空气处理机，风机盘管单元，管道，增压室，熔炉或任何其他不需要导管布线的应用提供了经济且可靠的解决方案。
TE-702-A    
TE-702-B温度传感器
镀锌钢外壳
工业标准NEMA-1/IP-30镀锌金属外壳，适用于所有工业和商业管道温度传感应用。密封，快速响应304不锈钢探针压接连接到外壳法兰，以提供低轮廓配合表面，外部安装支架符合不平坦表面，钥匙开启的外壳盖无需拆下螺丝即可打开，1/2“导管开口一些提高可靠性和降低安装成本的功能。    
Description
TE 701/702 temperature sensors offer the industry's most extensive range of enclosure, installation and sensor types to satisfy all HVAC, industrial and commercial applications. These revolutionary sensors incorporate more than twenty five years of product development and experience drawn from millions of installations world wide in all types of applications. This product and process design combined with automated manufacturing processes yields a rugged, reliable, repeatable and stable temperature sensor at a low cost. The only line of temperature sensors offering lifetime warranty against moisture migration related failures.
For large volume OEM customers, TE-701/702 temperature sensors are available in many custom configurations. Wire type, length or gage, terminals, connectors, probe lengths, enclosure options or sensor types may be customized based on volume.          
TE-701-A/B Temperature Sensor Flange Mount
Incorporate a hermetically sealed 304 SS probe, crimped on to a Steel flange providing a rugged assembly for duct temperature sensing. Two mounting holes are provided for #8 screws and the flange mating surface is fully gasketed to seal off the probe and screw holes. TE-701-A is available with 3 in/75mm wire leads and the TE-701-B has 6 ft/1.8 meter plenum rated cable. TE-701-A/B is an ideal product for a rugged, reliable, quick and easy installation in air handlers, fan coil units, ducts, furnaces, freezers, ovens or any other through the wall temperature sensing application.
TE-701-A/B                   
TE-701-C/D Temperature Sensor Bulkhead Mount
Fast response 304 SS probe with a brass bulkhead fitting and a compression sleeve forms a strong assembly for duct temperature sensing if adjustable insertion depth is desired. The bulkhead fitting is installed in the duct, compression sleeve loosened, probe inserted to the desired length and the sleeve is tightened. Sensor is available with 3 in/75mm leads or 6 ft/1.8 meter plenum rated cable. TE-701-C/D sensors provide a low cost, rugged, quick and easy installation in air handlers, fan coil units, ducts, plenum, furnaces, freezers, ovens or any other through the wall temperature sensing application which requires adjustable insertion length.
TE-701-C/D               
TE-702-A Temperature Sensor Polycarb Enclosure
Corrosion free 30% glass filled polycarbonate enclosure designed to withstand temperature extremes, mechanical shock and vibration. 304 SS probe crimp attached to the enclosure flange for a low profile mating surface, external mounting bracket to conform to irregular surfaces, single screw cover attachment, are some of the features which improve reliability and lower installation cost. TE-702-A temperature sensors provide a cost effective and reliable solution for air handlers, fan coil units, ducts, plenums, furnaces or any other application which does not require conduit wiring.
TE-702-A    
TE-702-B Temperature Sensor
Galvanized Steel Enclosure
Industry standard NEMA-1 / IP-30 galvanized sheet metal enclosure designed for all industrial and commercial duct temperature sensing applications. Hermetically sealed, fast response 304 SS probe crimp attached to the enclosure flange to provide a low profile mating surface, external mounting bracket to conform to uneven surfaces, keyed enclosure cover to swing open without removing the screws, 1/2" conduit opening, are some of the features which improve reliability and lower installation cost.
TE-702-B               
TE-702-C Temperature Sensor
Painted Steel Enclosure
Rugged steel enclosure with welded seams, gasketed cover and powder coated finish, rated NEMA-4 / IP-65 for harsh environments. TE-702-C has all the other features including a 304 SS probe, external mounting bracket, conduit opening similar to the TE-702-B series except designed for applications in unconditioned environments where the unit may be subjected to dirt, condensation, oil vapor and other contaminants.

NORGREN          4088126707901200
OLEOWEB           VMD10C3
AVENTICS           0822495004
AVENTICS           5811421110
AVENTICS           5811221310
SCHMALZ           VS-V-EM-ST
ATOS                  E-DAP-250/2  10
HYDAC               HDA4745-A-060-000
HYDAC               HDA4744-B-400-000
HYDAC               HDA4744-A-400-000
JUMO                 608501/2160-840-02-4000-872-6-103-3
GRAS                 AM0069(PU=5PCS)
GEMU               4232000Z1403005M00000
ELTRA                EPLB150S5C4R
ELTRA                EAM58CR256/8192G8/28SXX10S-3PCA
MARPOSS          3919963160
MARPOSS          3919963106
MARPOSS          3191910809
MARPOSS          3191910807
DI-SORIC            DCC 08 M03 PSK-IBSL
VARIOHM           ETP2100-BC-(40/150)-2-A
DR.BREIT             NR.405040006
KTR                     KTR150  10*13
KTR                     KTR150  16*20
MULLER              7TP15
POGGI                HTD0880-8M-30
POGGI                HTD0640-8M-30
BUCHER              QX32-010R09
ASM                    WS10SG-100-10V-L10-M4-M12
EPCOS                BR6000-R12
RUDOLPH TIETZSCH   83310
TERMONIC           26150-0  24VAC/DC 250V 10A
HASCO                 Z1591/24*25  272787
HYDAC                HDA4745-A-400-000
HYDAC                ENS3216-3-0730-000-K
MEGGER              MIT525